BDS85972 will upgrade your 1997-2006 Jeep Wrangler TJ/LJ or 1984-2001 Cherokee XJ with BDS NX2 Nitro Series rear shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks use a large 1-3/8-inch fluon-banded piston self-lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion. Polyurethane bushings and metal sleeves are included to make swapping over your shocks a breeze. Offered in various stem and eyelet bushing configurations for custom applications and available to work with all current BDS lift kits. Finished in a durable metallic silver paint with NX2 decals. Designed to work with a 0 to 2-inch lift kit.
Tapered and roll-pointed leafs add flexibility and provide an even deflection rate Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex Multi-leaf progressive design for smooth ride Anti-friction pads provide a smooth and quiet ride Adjustable Damping: No Adjustable: No Compressed Length: 13.4200 IN Extended Length: 21.7000 IN Finish: Metallic Silver Gas Charged: Yes Lower Mount Code: EB1 Lower Mount Type: Eyelet Mounting Hardware Included: No Pvg Product Status: Active Shaft Diameter: 14mm IN Travel Length: 8.2800 IN Type: Twin Tube Upper Mount Code: BP18 Upper Mount Type: Bar Pin
Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.