SKU:
BDS122302
UPC:
00658848619375
BDS122302 will increase wheel travel by upgrading the stock control arms on your 1994-1999 Dodge Ram 2500 and 3500 4WD to BDS performance fixed length upper and lower control arm kit. Specially designed for 5" lifted applications these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and recenter the front axle in the wheel well while adjusting for proper caster and pinion angles. These fixed length control arms can be used with BDS 5-inch lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific polyurethane bushings dual fluted for maximum greasing for smooth quiet operation and superior durability compared to arms featuring uniballs rubber bushings or heims.Tapered and roll-pointed leafs add flexibility and provide an even deflection rate Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex Multi-leaf progressive design for smooth ride Anti-friction pads provide a smooth and quiet ride Adjustable: No Bracket Material: Steel Bushing Material: Rubber Greaseable: Yes Installation Time: 4 Hrs Pvg Product Status: Active Tubing Material Thickness: 0.2500 Tubing Material: Steel
Features-
Details-
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
