80-96 Bronco 4WD 4/4 Ra Block Kit - BDS361H

$1,426.65
SKU:
BDS361H
Free Shipping Eligible
Minimum Purchase Required
SKU:
BDS361H
BDS361H will raise the bar and take your 1980-1996 Ford Bronco full size 4WD truck to the next level with a 4-inch suspension lift kit with extended radius arms by BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 33" tires. Up front the lift kit includes Pro-Ride coil springs axle pivot relocation brackets extended radius arms radius arm drop mounts forged pitman arm for steering correction and precision tuned NX2 nitrogen charged shocks. In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs
A pair of full-length vehicle-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Extended Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. The extended radius arm system will reduce caster change through wheel travel creating a more capable and controlled feeling in the steering wheel both on and off road.

Features-

  • Tapered and roll-pointed leafs add flexibility and provide an even deflection rate
  • Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place
  • Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex
  • Multi-leaf progressive design for smooth ride
  • Anti-friction pads provide a smooth and quiet ride
  • Details-

  • Front Lift Height: 4 IN
  • Front Lift Method: Coil Springs
  • Installation Difficulty: moderate
  • Installation Time: 6 Hrs
  • Installation Tools: Air Hammer Rec-drill-jack hydraulic-puller pitmanArm
  • Rear Lift Height: 4 IN
  • Rear Lift Method: Block
  • Rear Lift Option: Block Kit
  • Shocks Included: Yes
  • Notes-

  • If your vehicle is equipped with a front anti-sway bar you will want a 123401 available in the options.
  • Does not fit Broncos without power steering.
  • Front alignment cams available in the accessories may be required for alignment.
  • Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.

    Reviews & Questions