3-4" Lift Stage 6 Suspension System Tubular UCA - ICON K40006T

$6,458.75
SKU:
K40006T
UPC:
840103416168
Free Shipping Eligible
Minimum Purchase Required
SKU:
K40006T
UPC:
840103416168

3-4" Lift Stage 6 Suspension System Tubular UCA - ICON K40006T

The ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2023 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4” of front lift and 2-3” of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.

Features:

  • Improved suspension performance and ride quality over stock
  • Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
  • Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
  • Coilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
  • Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
  • Tubular UCAs for added strength, durability, and alignment correction for better drivability
  • 6061 Aircraft grade aluminum CNC machined components
  • Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
  • ICON engineered coil springs featuring a unique triple rate rear coil design
  • Tubular rear lower links improve rear end articulation and allow for pinion angle adjustment
  • Attributes:

    • Add-On Part: 611075 - C/O BUMP STOP SPACER KIT 7/8" SHAFT 1/2" TALL
    • Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
    • Add-On Part: 42000 - 21-23 BRONCO CRASH BARS
    • Add-On Part: 611073 - 21-23 BRONCO HOSE ROUTE KIT REAR LINK 1.75"
    • Add-On Part: 611074 - C/O BUMP STOP SPACER KIT 7/8" SHAFT 3/8" TALL
    • Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
    • Add-On Part: 191013 - NIPPLE GREASING ADAPTER KIT
    • Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
    • Add-On Part: 191009 - ICON LONG 2.5 COIL WRAP W/LOGO (14.5-15.5)
    • Bushings Included: Yes
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Coil Spring End 1 Type: Square
    • Coil Spring End 2 Type: Square
    • Coils Quantity Front: 2
    • Coils Quantity Rear: 2
    • Front Spring Rate Type: Linear
    • Grade Type: Performance
    • Maximum Lift Front: 4IN
    • Maximum Lift Rear: 3IN
    • Minimum Lift Front: 3IN
    • Minimum Lift Rear: 2IN
    • Mounting Hardware Included: Yes
    • OEM Wheels & Tires Fitment: Yes
    • Rear Spring Rate Type: Progressive Triple Rate
    • Recommended Aftermarket Tires: 35" x 12.50" (Recommend high clearance crash bars part number 42000, 37" tires require coilover bump stop spacers along with trimming and modifications)
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6.00" Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
    • Shocks Included: Yes
    • Spring Color: Black
    • Spring Material: Steel

    Notes:

    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6.00" Backspace / 25mm Offset
    • Recommended Aftermarket Tires: 35" x 12.50" (Recommend high clearance crash bars part number 42000, 37" tires require coilover bump stop spacers along with trimming and modifications)
    • APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
    • APPLICATION NOTE #66: 2 Door Models Will Sit Taller Than 4 Door Models.
    • APPLICATION NOTE #132: When Running 37" Tires Use Up Travel Limiters Part #611075 In The Front
    • APPLICATION NOTE #133: When Running 37" Tires Use Up Travel Limiters Part #611074 For The Rear
    • APPLICATION NOTE #135: Lift Heights & App Notes Based Non-Sasquatch Equipped Vehicles

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions