2023 Toyota Sequoia 3-4.25" Lift Stage 4 3.0 Suspension System Tubular - ICON K53254T

$11,020.55
SKU:
K53254T
UPC:
840103422183
Free Shipping Eligible
Minimum Purchase Required
SKU:
K53254T
UPC:
840103422183

2023 Toyota Sequoia 3-4.25" Lift Stage 4 3.0 Suspension System Tubular - ICON K53254T

The ICON Vehicle Dynamics Stage 4 3.0 complete suspension system for the 2023 Toyota Sequoia builds upon the Stage 12 2.5 suspension system with the upgrade to 3.0 Series CDEV front coilovers. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs, improved rear articulation, and increased front-end lift height range for a proper stance and fitment of up to 35" tires. This Stage 4 system features the 2023 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 3-4.25” of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. The multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON’s Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 3” of rear lift height over stock allows a for level stance front to rear. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023 Sequoia. Double adjuster rod end threads allow easy “on-vehicle” fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 4 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2023 Sequoia. 3.0 Series shocks boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street. Increased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use. Also equipped with CDE Valves, these offer active, on the fly compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.

Features:

  • 3.0 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
  • Adjustable front ride heights from 3-4.25” of front lift over stock
  • ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
  • ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes
  • Tubular UCAs for added strength, durability, and alignment correction for better drivability
  • UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
  • Billet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
  • Dual rate rear coil springs improve performance and ride quality while providing 3" of rear lift
  • On-vehicle adjustable rear track bar properly centers rear axle while also improving rear suspension performance
  • 3.0 Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers
  • Attributes:

    • Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
    • Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
    • Add-On Part: 55156 - 22-23 TUNDRA/23 SEQUOIA DIFF DROP KIT
    • Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
    • Add-On Part: 55153 - 22-23 TUNDRA/23 SEQUOIA AIR RIDE/AUTO HEADLIGHT BRACKET KIT
    • Bushings Included: Yes
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Coils Quantity Rear: 2
    • Grade Type: Performance
    • Maximum Lift Front: 4.25IN
    • Maximum Lift Rear: 3IN
    • Minimum Lift Front: 3IN
    • Mounting Hardware Included: Yes
    • OEM Wheels & Tires Fitment: Yes
    • Rear Spring Rate Type: Progressive Dual Rate
    • Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
    • Shocks Included: Yes
    • Spring Color: Black
    • Spring Material: Steel

    Notes:

    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6” Backspace / 25mm Offset
    • Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
    • APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
    • APPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.
    • APPLICATION NOTE #142: Not Compatible With Tundra/Sequoia Equipped With Load-Leveling Rear Height Control Air Suspension.
    • APPLICATION NOTE #144: Not Compatible With Trd Pro
    • APPLICATION NOTE #149: For 4Wd Models Without Trd Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota Trd Axles (Part# 434200C020 Driver / 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For Trd Pro.

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions