2020-Up Jeep Gladiator 2.5" Lift Stage 5 Suspension System Tubular UCA - ICON K22105T

$3,648.30
SKU:
K22105T
UPC:
840103415901
Free Shipping Eligible
Minimum Purchase Required
SKU:
K22105T
UPC:
840103415901

2020-Up Jeep Gladiator 2.5" Lift Stage 5 Suspension System Tubular UCA - ICON K22105T

The Stage 5 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving off-road performance and overall ride quality for the application that will see frequent moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, tubular steel fixed lower and adjustable upper front links, billet front sway bar links, a triple-rate rear coil spring kit, tubular steel fixed upper and adjustable lower rear links, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

Features:

  • 2.5 lift height
  • Fits 35" tires (37" with extended bump stop spacer kit)
  • 33% front, 23% rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Front upper and lower links included for caster angle correction and improved front end articulation
  • Rear tubular upper and lower links improve rear end articulation and allow for pinion angle adjustment
  • Dual rate front coil springs with lifetime guarantee against sagging/breakage
  • Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
  • 2.0 Aluminum Series shocks with vehicle specific valving
  • Front and rear track bars ensure proper alignment and improved articulation
  • Attributes:

    • Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
    • Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
    • Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
    • Bushings Included: Yes
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Coil Spring End 1 Type: Open
    • Coil Spring End 2 Type: Open
    • Coils Quantity Front: 2
    • Coils Quantity Rear: 2
    • Grade Type: Performance
    • Maximum Lift: 2.5IN
    • Mounting Hardware Included: Yes
    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
    • Shocks Included: Yes
    • Spring Color: Black
    • Spring Material: Steel

    Notes:

    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset
    • Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071)
    • APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle
    • APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim
    • APPLICATION NOTE #150: Shocks Are Fully Serviceable
    • TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
    • TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions