2018-Up Jeep JL Wrangler 2.5” Lift Rear Dual Rate Coil Spring Kit - ICON 22026

2018-Up Jeep JL Wrangler 2.5” Lift Rear Dual Rate Coil Spring Kit - ICON 22026

The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep Wrangler JL coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon JL) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler.

Features:

Attributes:

• California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
• Finish: Powdercoated
• Grade Type: Performance
• OEM Wheels & Tires Fitment: Yes
• Rear Spring Rate Type: Variable
• Rear Spring Seat Included: No
• Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional extended bump stop spacer kit PN: 22029)
• Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
• Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
• Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
• Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
• Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
• Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 17x8.5 w/ 4.75" Backspace / 0mm Offset
• Service Parts: 611002 - SWAY BAR LINK BUSHING AND SLEEVE KIT
• Spring Color: Black
• Spring Material: Steel

Notes:

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels (Rubicon): 8.5 Wide, 4.75" Backspace
• Recommended Aftermarket Wheels (Non-Rubicon): 8.5 Wide, 4.50" Backspace
• Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029)
• TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
• TECH NOTE: The supplied coil shim is used to account for the difference in heights from side to side and correct a passenger side lean.
• TECH NOTE: Lift height based on a factory equipped 4 door Rubicon Wrangler JL.
• TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information.