2014-2016 Chevy Silverado 1500 2wd Double Cab 2/4" or 2/5" Premium Sprindle Drop Kit - 34140

These will not, we do offer a 2" rear but nothing shorter as of yet.

We can help you, the struts can be ordered here - CLICK HERE

This does not need to cut the bed for this kit.

The caliper will bolt directly to the new lowering spindle.

These are the added support braces that go from the crossmember to the transmission crossmember. Some call then "Front traction bars"

Most cases shipping time is 3-5 days to most places.

At this time, we do not.

This kit includes the rear lift hanger, this will allow you to adjust the rear lift height for level at 8 or 9"

You do not, the factory shocks will work perfect.

This kit will not need a notch at the 5 or 6" drop settings. On the 7" setting we do recommend it.

This will not, they fit the old body style truck. You would want to run this kit on the new RAM - CLICK HERE

This is a complete kit, front is lifted 7" and the rear is lifted 5" for a level stance.

These will not, you would need the 200300 rear lowering coils or the full 2/2.25 drop kit.

That truck would use this shackle - CLICK HERE

This is the front lift spindles with front extended brakelines.

We do not have an air helper for the 2" rear drop coils. The factory autoride should work on this and keep you level.

These are 100% the correct fitment for your vehicle and will be a direct fit.

These are the correct part for this vehicle and are a direct fit.

This will as long as it's not the aluminum monoleaf suspension

We have not test fit the AT4 model specifically but it should work.

This kit for sure fits the 2007 New body Tundra (Not the 06 body) these are currently in stock in Belltech's California warehouse but that changes quickly and often!

This should be the perfect drop on this and will not be squated looking.

These keys will fit on a 4wd truck no problem

We have not test fit the 5500's I am not sure if it will or not.

Yes that is correct, this would provide 1" additional lift on their 4" kit.

This kit is built by MaxTrac with our 7-9" adjustable lift struts added. This can be ran at 9" but to do so you will need aftermarket upper control arms.

There should be no issue at all with that. The MaxTrac rear axle flip kit includes transmission shim spacers as well if needed.

This is a front disc replacement kit on this option.

Yes they are, QTY 1 is 1 pair.

As long as the Denali Canyon does not have magneride this should be no issue on fitment. This is a 2" drop front and 4" drop rear.

They should not as long as they are not a HUGE offroad negative offset.

I have never had those complaints on these keys., they should work well for you.

This is a 4" rear drop.

We are not aware of any changes in the vehicle for 2022, just waiting on official confirmation but this kit should fit!

There is no way to run a 5/7 drop without a c-notch as the axle will be sitting on the frame without it.

With the mag ride deleted these will work. You will need to get new upper strut mounts from a Silverado.

This kit sure will! It will even work with the factory 15" wheels!

We use a 12"-13" extended front shock on these kits.

This kit is only sold as a set of front and rears, I am not sure of those specs especially on a deleted model. This would probably best be answered by Belltech Directly.

There should not be any issues, this kit in most vehicles aligns to factory spec. If more adjustment is needed we offer camber kits as well.

The spindles used in the 889857 kit are the MaxTrac 100520 these are exceptional build quality parts with no camber issues. This kit is only the best quality parts available with killer instructions and a lifetime warranty! Features- • Does NOT Widen Track Width • 15" Wheels Can Be Ran • You Will Need To Trim Lower Control Arm Lip • Highest Quality Machining • E-Coated For Durability

The front components will also work on the Suburban, the rear will need to be modified.

This would turn the 3/5 into a 3/7 or 3/8 by replacing the shackle.

Our Recommendations- 3/5" drop clears factory tire diameter and does not need c-notch or air helper kit in most cases 4/6" drop clears factory tire diameter (May require minor trimming of inner fender liner) C-notch non needed in most cases. Air helper kit is recommended if towing or loading truck bed often. 4/7" -5/7" May require a smaller over all diameter tire or more trimming to inner fender liners. C-Notch is HIGHLY recommended and an air helper kit would be a great addition if towing or loading the truck bed.

This kit includes rear add a leafs used when running the truck at 8" or above.

The 2wd kit comes with MaxTrac Nitrogen Charged Drop Shocks The 4wd Kit comes with BellTech Nitro Drop Shocks

On the 2wd trucks we set it up with MaxTrac shocks, On the 4wd we set it up with Nitro Drop shocks.

The disc option is a front OE style replacement kit. We do offer a Wilwood front caliper and willwood rear disc conversion kit as well.

The new keys ride WAY better than cranked up stock keys. But there is some change over factory ride.

The bearings for the LD brakes will be standard OEM style replacements. I do not have the numbers for them however.

More than likely the bolt on kits will not work with the drop shackles. You may need to build custom mounts.

Our 2.5" drop spindles will allow you to run 15" wheels.

Yes sir, that is the correct fitment.

Yes sir, this will work on that no problem as long as it's a 1500 6 Lug.

Without know the part number, brand and drop amount of the coils it is hard to tell they could have been a larger drop or even possibly modified. The 2" drop spindles are a true 2" drop over stock height.

This kit will work on that truck, the struts do have adjustment up to the 9" setting. You will need a new upper control arm for ride quality and alignment.

On the 2019-2020 New body the factory rear shocks will work no problem,.

This should not, these trucks 99.9% of the time will align perfectly. If not, a simply $26 camber kit will correct it.

We are not able to de-code VINs please email sales@accessorypartners.com

We do offer the rear sway bar, you can see it here- Click Here

No sir, on the 2007 Classic you will want to run the 1999-2006 model drop kits.

On the 2/4 drop the OE size tires will work perfectly- 20's = 275/55r20 22's = 285/45r22 or 305/40r22

We have not had any fitment issues with the factory C10 wheels, if these are aftermarket rallye wheels you may have fitment issues on the tierod end of the spindle casting and also the lower control arm during turning.

Sorry this will not fit the HD models.

The add shock option works great on this, you can certainly add the shock extensions to correct the angle but they are not "needed"

I would expect so, if running a stock wheel.

These spindles should not change the trac width of the truck.

These spindles will work perfectly on the factory 15" wheels. Aftermarket 15's could have fitment issues with clearance on the lower control arms and tie-rod end casting.

Yes sir, that is the correct fitment on the new body truck.

Every once in a while on the 2019-2020 trucks we will get one that does that. Pretty rare but they happen. You will more than likely need a pinion shim. Email us at robc@accessorypartners.com or call us and we can help.

That is correct, these are for the 2019 New Body Style. They are 100% different than the previous body style shackle.

Here you are- Sensor Rods Shock Extensions

Yes it sure does.

This kit uses the highest quality parts made by MaxTrac, the Coils, Flip Kit, C-Notches are all Made in the USA with lifetime warranty as well! SUPER High quality components with an amazing finish and quality.

You will want to use the following - Shock Extenders Rear Sensor Rods

Dave, It is possible that the pinion angle would change from the shackles yes, in our experience they do not normally need pinion shims but every truck is different. With that said it is usually an easy correction if they are needed. You will need to measure the tail shaft angle and pinion angle and determine what they are. Once you have those measurements you can see how far off they are and shim with the appropriate angle shim. They should be equal but opposite- Essentially 4deg Positive Trans and 4deg Negative Pinion.

Hi William, Did you find a better price somewhere else? If it's a legit source on MaxTrac, we are happy to match price and offer you superior service. We ship from our own warehouse. -Rick

This kit will include either the coils or torsion keys based on your selection of 2wd or 4wd.

This kit will work perfectly on a long bed as well!

Great question! If you select the 1" rotor option we will send the correct spindles. You can also select the 1.25" option and we will set you up with you HD brakes. We even have an option for those as well!

You can certainly add the rear sway bar if you would like to, the factory sway bar will work perfectly as this kit includes the new correct length sway bar end links!

This will 100% fit that truck, just select Regular cab in the options and we will get you the correct coils.