2007-21 Toyota Tundra 3.0 VS RR/CDCV Coilover Kit - ICON 58755

$3,781.08
SKU:
58755
UPC:
840103404554
Free Shipping Eligible
Minimum Purchase Required
SKU:
58755
UPC:
840103404554

2007-21 Toyota Tundra 3.0 VS RR/CDCV Coilover Kit - ICON 58755

While ICON’s 2.5 Series coilovers are an excellent choice for drivers looking for a great all-around performance upgrade, there are a select few Tundra owners seeking to drive their vehicles in a manner and in terrain that beckons for more. The ICON Vehicle Dynamics 2007-2021 Toyota Tundra 3.0 Series Coilover Kit was designed to take the off-road capability of the truck to new levels by increasing wheel travel and significantly improving the damping ability of the front shocks. Compared to the 2.5” diameter coilovers the 3.0 Series shocks see a piston surface area increase of 50% in the ride zone, and 100% in the “Bump Zone”. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The multi-stage hydraulic Bump Zone featured in these 3.0 Series shocks exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. These 3.0 Series coilovers were designed as an OEM shock replacement, making install a simple and straightforward bolt-on affair. Built in ride height adjustability yields 1.63-3.5” of front lift height allowing for the fitment of larger, more aggressive wheel and tire combinations. First class ICON manufacturing processes and quality components such as Eibach coil springs and FK Rod End bearings are used to ensure these shocks function to their maximum potential without issue.

Features:

  • Significant increase in damping ability for excellent performance in extreme off-road conditions
  • Heavy duty 1” CNC machined shock shafts
  • Multi stage CAD plated shock body with hard anodized piston and top cap
  • Fully serviceable
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
  • Increased wheel travel and vehicle specific valving provides comfortable and consistent ride quality on and off-road
  • Adjustable coilovers provide 1.63-3.5” of front lift height over stock
  • Direct bolt-in to OEM shock location makes for an easy install
  • ICON’s multi-stage, tuneable hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
  • Easy-to-adjust CDC Valve allows for end-user compression changes to suit all types of terrain and vehicle cargo configurations
  • Attributes:

    • Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
    • Add-On Part: 191010 - ICON RAPTOR 3.0 COIL WRAP W/LOGO PAIR
    • Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
    • Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
    • Adjustable Damping: Yes
    • Adjustable Height: Yes
    • Body Diameter: 3IN
    • Boot Included: No
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Coil Over Springs Included: Yes
    • Damping Type: Oil
    • Dust Shield: No
    • Gas Charged: Yes
    • Grade Type: Performance
    • Lower Mount Type: Eyelet
    • Material: Aluminum
    • Material: Steel
    • Maximum Lift: 3IN
    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Tires: 35" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 6” Backspace / 25mm Offset
    • Remote Reservoir: Yes
    • Service Parts: 302005 - 3.0 ICON REBUILD KIT (ALL)
    • Service Parts: 611025 - 07 TUNDRA CO HARDWARE KIT PAIR
    • Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
    • Service Parts: 252003 - SEAL INSTALL TOOL 2.5/3.0
    • Service Parts: 252002 - UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0)
    • Shaft Diameter: 1IN
    • Shock Absorber Body End Measuring Point: Top of Upper Mount Plate
    • Shock Absorber Rod End Measuring Point: CENTER OF EYELET
    • Spring Color: Black
    • Spring Material: Steel
    • Upper Mount Type: Mounting Plate

    Notes:

    • Factory Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6” Backspace / 25mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 6” Backspace / 25mm Offset
    • Recommended Aftermarket Tires: 35" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions