SKU:
101320
Estimated Shipping: Ships Same Day
2007-2013 Chevy & GMC 1500 2wd/4wd 2" MaxTrac Lowering Spindles (Cast Steel) - 101320
MaxTrac Suspension 101320 has a 2" lowering spindles to provide a moderate drop in the front of your 2007-2013 Chevy or GMC 1500. Along with that, the spindles have very minimal effect on your alignment, no effect on your ride quality, and even less effect on your wallet. Pair these up with a 3" or 4" rear lowering kit, and you have a new low profile look to your ride, hopefully on some 22" or 24" wheels to wrap everything up for a dramatic appearance.
Features-
- Ductile iron construction
- 100% bolt on installation
- Maintains factory ride quality
- No additional products required for realignment
Notes-
- Fits Both 2wd & 4wd Models
- Does NOT fit aluminum suspension model
- Must use 17" wheel or larger
- 20in. wheels or smaller require minor trimming to ball joint bolt
Fits-
- 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevy Silverado 1500 2wd
- 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevy Silverado 1500 4wd
- 2007, 2008, 2009, 2010, 2011, 2012, 2013 GMC Sierra 1500 2wd
- 2007, 2008, 2009, 2010, 2011, 2012, 2013 GMC Sierra 1500 4wd
MaxTrac Suspension Part # 101320
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac's specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac's liability and customer's exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac's option and in Max Trac's sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.