2005-Up Toyota Tacoma 0-1.5” Lift Rear 2.5 Omega Remote Res Shocks Pair - ICON 59905P

$1,889.95
SKU:
59905P
UPC:
840103404769
Free Shipping Eligible
Minimum Purchase Required
SKU:
59905P
UPC:
840103404769

2005-Up Toyota Tacoma 0-1.5” Lift Rear 2.5 Omega Remote Res Shocks Pair - ICON 59905P

ICON Omega Series Bypass shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in length but allow the user to customize the ride characteristics to their liking through adjustment of the bypass valves. Like all ICON shock absorbers, Omega Series shocks are 100% rebuildable and 100% revalveable. ICON’s use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used, creates a significant increase in damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON Bypass Valve is an externally adjustable valve that restricts oil flow through the bypass tube and provides 28 settings of compression and rebound adjustment with no tools required.

Features:

  • ICON's Bypass Valve technology allows adjustment of compression and rebound damping with high resolution across the entire adjustment range
  • Hand adjustable bypass valves with 28 detented settings at quarter turn increments for precise suspension tuning
  • Bypass tubes are replaceable in the event of damage
  • Internal “Bump Zone” increases damping force to provide more control as the shock approaches full compression
  • Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
  • One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • Polyurethane bushings and forged steel mounting stems for OE factory type fitment
  • PTFE lined spherical bearings and application specific mounting hardware
  • Attributes:

    • Add-On Part: 252008 - 2.5 X 13 SHOCK BOOT BLACK (PAIR)
    • Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
    • Adjustable: Yes
    • Boot Included: NO
    • Bore Diameter: 2.25IN
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Cylinder Material: Aluminum
    • External Reservoir: Yes
    • Gas Charged: Yes
    • Lower Mount Type: EYELET
    • Mounting Hardware Included: Yes
    • Service Parts: 252002 - UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0)
    • Service Parts: 611006 - 9/16 HD STEM BUSHING KIT
    • Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
    • Service Parts: 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
    • Service Parts: 257339 - 7/8 SHAFT 13.25 OAL, 9.00 TRAVEL
    • Service Parts: 252003 - SEAL INSTALL TOOL 2.5/3.0
    • Service Parts: 191016 - 7.5" FINNED RESI UPGRADE KIT
    • Service Parts: 252001 - 2.5 FIXED SPANNER WRENCH
    • Shock Absorber Body End Measuring Point: Shoulder of Stem
    • Shock Absorber Rod End Measuring Point: Center of Eylet
    • Tube Outside Diameter: 2.5IN
    • Upper Mount Type: Stem

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions