SKU:
703030C
Estimated Shipping: Ships Same Day
2001-2009 Ford Ranger Edge/Sport 2wd Torsion Bar (Non Stabilitrak) 4" MaxTrac Lift Spindles - 703030C
Maxtrac Suspension 703030C offers 4" lift spindles that work on your 2wd 2001-2009 Ford Ranger Edge or Sport models. These lift spindles maintain stock like geometry and keep the Ranger riding smooth, while increasing track width by half an inch. The moderate lift height provides enough clearance for much bigger wheels and tires for either a more aggressive street look, or the basis for some off-trail fun. The heavy duty 4" lift spindles are a true bolt on piece which replaces the stock spindles, and exceed OEM specifications. Ductile Iron construction make these bullet proof.
Wheel and Tire Fitment-
- Increased Track Width +0.5
- Clears Up To 31" Tires With Correct Wheel and Tire Combination
- 15" Wheel or Larger
- With 3.75" Backspace or Less
Notes-
- Prior To Installation Measuring Required When Selecting Wheel and Tire Combination
- Trimming Might Be Required For Optimal Fender Well Clearance
- Will NOT Work On Stabilitrak
- 2wd Torsion Bar Models ONLY
Fits-
- 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Ford Ranger Edge 2wd
- 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Ford Ranger Sport 2wd
Installation Instructions Click HERE
MaxTrac Suspension Part # 703030C
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac's specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac's liability and customer's exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac's option and in Max Trac's sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
