SKU:
703535
Estimated Shipping: Ships Same Day
1997-2004 Ford F-150 Heritage 2wd 3.5" MaxTrac Lift Spindles - 703535
MaxTrac 703535 3.5" lift spindles for your 2wd 1997-2004 Ford F-150 Heritage provide true ground clearance, options for combining coil springs or spacers to achieve additional height, and the smooth ride quality that's expected from a stock vehicle. The simple bolt on installation of these parts allow you to fit bigger wheels and tires easily, track width is increased by half an inch, and alignment stays neutral. MaxTrac's signature spindle process has these constructed out of ductile iron in a cast mold, resulting in a single bullet proof suspension component that holds up to the toughest conditions and exceeds OEM standards.
Wheel & Tire Fitment-
- Will clear up to a 33" tires with the correct wheel & tire combination
- 16" wheel or larger with 4.525" backspace or less
- Increases track width +0.5" per side
Notes-
- Fits 2wd Models ONLY
- 15" Stock wheels will not work
Fits-
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford F-150 Heritage 2wd
Installation Instructions Click HERE
MaxTrac Suspension Part # 703535
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac's specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac's liability and customer's exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac's option and in Max Trac's sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
