1990 - 1995 Toyota 4Runner 2WD/4WD OEM Replacement Performance Rear Shock Belltech - SP10311P
Belltech Street Performance Rear Shock SP10311P for your 1990 - 1995 Toyota 4Runner is a cheap and effective way to increase the performance and ride quality of your 1990 - 1995 Toyota 4Runner! Belltech OEM Street Performance shocks are professionally constructed and finely tuned to fit your vehicle. Engineered with attention to detail, these shocks are designed to improve upon low speed characteristics such as pitch, roll, comfort and grip. You can always count on Belltech to give you the highest quality parts available so don't hesitate, get these premium Belltech shocks on your ride today!
Belltech SP10311P Street Performance Rear Shock Fits-
- 1990 - 1995 Toyota 4Runner
- Metal dust boots
- Hardened Chrome 15mm piston rods
- Triple lip NBR rod seal
- Teflon guide bushing
- 35mm pistons w/ low friction Teflon seals
- 55mm wide body for increased oil volume
- OEM quality rubber bushings
- (1) Street Performance Rear Shock SP10311P
- 1990, 1991, 1992, 1993, 1994, 1995 Toyota 4Runner 2WD/4WD
Effective January 1, 2011. Supersedes all previous terms, policies, and agreements
KW automotive North America Inc. warranties its products to the original retail purchaser against defects in workmanship and material for the following terms from the date of purchase:
Belltech Sport Truck Products
Lowering Components ?Limited Lifetime Warrantee
Nitro Drop 2 & Street Performance Shock Absorbers ? 2 years
Bushings, Bump stops and Ball Joints - 1 year
Warrantee Conditions & Limitations
This warranty is NOT TRANSFERRABLE, is limited to the United States and its holdings, Canada and Mexico. This warrantee does not apply to:
Any articles not purchased through authorized KW automotive North America Inc. dealers.
Any articles that show signs of abuse, collision or improper installation.
OEM Equipment & Private label items produced by KW automotive (warrantee is carried by the private label company unless otherwise specified).
Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
Any parts that have been sold with "No Warranty" designation on the original invoice.
Any parts that have been modified or altered in any way from its original configuration.
Any parts that have been:
Used out of its published operating range or outside KW tested force ranges, i.e.
Excessively lowered or raised vehicles.
Used in conjunction with non Non-KW automotive North America Inc. approved Air Bag kits, sway bars, springs, control arms etc?
See Terms & Conditions for warranty claim information.