Single Stabilizer Kit - NX2 Shock - BDS2004SH
Enhance the handling of your 2016-2024 Chevy Silverado or GMC Sierra 2500 HD truck by installing a BDS single steering stabilizer mounting kit with NX2 shock. Installing larger tires can exert additional force on your truck's suspension but steering stabilizer shocks can effectively reduce bump steer and steering wheel feedback. BDS mounting brackets are constructed of high-strength steel and can be easily bolted on. With the installation of a steering stabilizer kit along with your BDS lift kit you can extend the lifespan of your factory steering components. The BDS NX2 Stabilizer uses a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks use a large 1-3/8-inch fluon-banded piston self-lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion.
Features-
- Enhance vehicle control with reduced steering shimmy and bump steer
- Improve tire wear and front-end component life
- Lessen side-to-side motion caused by wide tires and road conditions
- Heavy-duty gusseted mounting brackets
- Durable metallic silver finish
- Vehicle specific valving for better control
- High-end performance at an affordable price
Details-
- Pvg Product Status: Active
Notes-
- Designed for models that are not equipped with steering stabilizer mount from the factory
- Works for all stock and lifted applications where the center link remains in the stock location. Ensure that the hole on your center link is tapered before ordering.
- Works for all stock and lifted applications where the center link remains in the stock location.
- Designed for 2016 models that are not equipped with a stabilizer mount from the factory.
- Ensure that the hole on your center link is tapered before ordering.
BDS Suspension Part # BDS2004SH
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
