SKU:
FOX88326077
FOX88326077 will if you're building the ultimate Jeep Wrangler JL install FOX Factory Race Series 3.0 Internal Bypass shocks. PN 883-26-077 front position shocks deliver race-dominating extreme-duty performance on all terrains. Designed for bolt-on installation on Jeep Wrangler JLs with JKS 3.5-4.5" lift kits the remote reservoirs feature connect via hose to new recirculating bridges. Separate high and low-speed compression adjustments help you fine tune performance to your exact driving style and vehicle specs. The remote reservoirs feature finned bodies to help dissipate heat and maintain optimal fluid temps. Inside the shock bodies position-sensitive internal bypass technology provides a plush predictable ride during normal off-road driving conditions with the ability to ramp up damping force to counteract harsh bottom-outs or top-outs. Additional features include large 3" diameter hard-anodized aluminum-bodies 7/8" shafts race-bred pistons and valving PTFE-lined spherical bearings proprietary racing oil and high-temp Viton seals. You won’t find a more capable off-road shock for your Jeep Wrangler JL.Tapered and roll-pointed leafs add flexibility and provide an even deflection rate Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex Multi-leaf progressive design for smooth ride Anti-friction pads provide a smooth and quiet ride Adjustable Damping: No Adjustable: No Compressed Length: 16.9800 IN Extended Length: 27.7000 IN Finish: Clear anodized Gas Charged: Yes Lower Mount Code: n a Lower Mount Type: Eyelet Mounting Hardware Included: No Pvg Product Status: Active Shaft Diameter: 7_8 IN Travel Length: 10.7200 IN Type: Smooth Body Upper Mount Code: n a Upper Mount Type: Eyelet
Features-
Details-
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
