Jeep TJ Front Shocks Adjustable Track Bar - BDS124601

$230.95
SKU:
BDS124601
UPC:
00711745607774
Free Shipping Eligible
Minimum Purchase Required
SKU:
BDS124601
UPC:
00711745607774
BDS124601 will replace your stock 1997-2006 Jeep Wrangler TJ adjustable front track bar with a heavy-duty BDS upgrade constructed from high-strength 5/16" x 1.5" OD tubular construction with a gusseted end and durometer-specific bushings. Unlike other adjustable track bars on the market this threaded double adjustment collar allows you to easily make changes while the track bar is already installed on the vehicle and is designed for use with 6- to 7-inches of lifted models compatible with most kits on the market. Lock in the length with the provided pinch bolt-style clamp. Formed for proper clearance around critical front-end components and is designed for easy bolt-on installation.

Features-

  • Tapered and roll-pointed leafs add flexibility and provide an even deflection rate
  • Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place
  • Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex
  • Multi-leaf progressive design for smooth ride
  • Anti-friction pads provide a smooth and quiet ride
  • Details-

  • Adjustable: Yes
  • Bushings Included: Yes
  • Installation Time: 1 Hr
  • Lift Height: 6_7 IN
  • Material: Steel
  • Mounting Hardware Included: No
  • Pvg Product Status: Active
  • Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.

    Reviews & Questions