GM F Body Level 3 Handling Kit - QA1 HK43-GMF2
QA1’s Level 3 Handling Kit is a complete solution for 2nd Gen F-body owners looking for ultimate track-day performance. This complete solution replaces your entire front and rear suspension, optimizing handling performance, while still maintaining comfort on the street. The coilovers offer adjustable ride height, while the rear suspension was optimized for wider wheels and tires.
Features:
- Bind Free, Light-weight Front Suspension
QA1's tubular front control arms stand out as some of the lightest available in the market. Low friction polyurethane bushings reduce flex and deliver bind-free movement. When paired with QA1's double adjustable Pro-Coil coilovers, and front sway bar this kit offers plenty of control over your suspension.
Achieve the Perfect Stance
Factory coil springs and leaf springs limit your ability to achieve the perfect stance on your Camaro or Firebird. Upgrading to QA1’s coilovers and a tubular 4-link provides 0 to -2 inches of adjustability in the front and 1.25 inches of ride height adjustability in the rear, letting you dial in exactly the look you want.
Fit Wider Wheels & Tires
Designed to work with both standard and mini-tubs, the rear system offers generous clearance for up to 12-inch-wide wheels and 335 tires. This results in a significantly more aggressive stance and improved traction and performance.
Note: Achieving maximum wheel and tire width will require mini tubs.
Improved Performance and Stability
4-way adjustable MOD shocks help drivers find grip in any setting. They make it easy to adapt to different events like autocross, road courses, speed stop challenges and more by changing out valve packs in minutes. It's also simple to go from race-oriented suspension to comfortable street driving between events.
Easy, Installation & Adjustment
Thoughtful design meets effortless installation with a completely bolt-in front suspension and a 4-link requiring minimal welding. You'll experience a painless installation and setup process, where adjusting ride height, pinion angle, or wheelbase is as simple as a few tweaks – no link removal required.
Note – Welding required
Made in the USA
QA1 suspension is proudly made in Lakeville, Minnesota.
Notes:
- Rear ride height range from axle centerline to fender arch is 10.75” to 12” for Camaros, and 13.75” to 15” on Firebirds.
- Wheel and tire fitment should be verified on the vehicle
- Welding Required
- Includes Spanner Wrench
- QA1 Subframe Connectors strongly recommended
- May require Exhaust Modification
WARRANTY / DISCLAIMER
QA1 warrants that the products will be free from defects in material and workmanship for one year from date of sale to the original purchaser. A limited lifetime warranty is offered on select shock absorbers. For registration and more information on the limited lifetime warranty, please visit https://www.qa1.net/Warranty. QA1 makes no other warranty of any kind, express or implied. QA1 shall have no obligation under the foregoing warranty where the defect is the result of improper or abnormal use, your negligence, vehicle accident, improper or incorrect installation or maintenance, nor when the product has been repaired or altered in any way. QA1's liability in the case of defective products subject to the foregoing warranty shall be limited to the repair or replacement, at QA1's option, of the defective products. Consequential or incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- QA1, in its sole discretion, shall determine whether or not any Eligible Product is defective or otherwise covered by this warranty.
- If the Eligible Product fails to perform properly due to defective materials or workmanship, QA1 will at its option either (i) repair the Eligible Product without charge, or (ii) replace the Eligible Product. If the Eligible Product is no longer available, QA1 will replace the Eligible Product with an equivalent product. No refunds will be provided.
- The warranty provided by QA1 does NOT apply if the Eligible Product fails to perform:
- due to cosmetic wear and tear from normal use;
- due to improper or abnormal use, abuse, neglect, negligence, vehicle accident, insufficient travel, improper or incorrect installation or maintenance; or
- when the Eligible Product has been repaired, replaced, substituted or altered in any way, or if used with parts other than genuine parts of QA1.
- QA1 is not responsible for installation or removal labor, or for any other repair charges associated with the Eligible Product.
- Customer pays shipping to QA1 for final determination on eligibility. Any repaired or replaced Eligible Product will be returned to customer excluding freight cost.
- QA1 shall not be liable for the loss of use of the Eligible Product, loss of time, inconvenience, commercial loss or any other indirect, consequential, special or incidental damages due to breach of the above limited lifetime warranty. QA1 makes no warranties of any kind, express or implied, other than as herein expressly provided, and specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Notwithstanding anything set forth herein to the contrary, QA1’s liability hereunder shall be limited to the purchase price of the Eligible Product.
In order to be eligible for service under this warranty, you must return the defective part to QA1 together with a RMA. number issued from QA1. Tag each item with the part number and the specific explanation of defect. We will inspect the part and determine: a) if it is eligible for repair or replacement; and, b) if so, whether to repair or replace it. All returns must be shipped prepaid to: QA1 Precision Products, Inc., RMA#__________, 9574 217th Street West, Lakeville, MN 55044.
THE BUYER UNDERSTANDS AND EXPRESSLY RECOGNIZES that racing parts, specialized street rod equipment, rod end bearings, and ALL parts and services sold by QA1 are exposed to many and varied conditions due to the manner in which they are installed and used. BUYER ACKNOWLEDGES that QA1 does not have full knowledge of the intended use of the goods, and BUYER WILL DEFEND AND INDEMIFY QA1 upon demand against all claims, actions, liability, loss and expense (including investigating expense and attorney fees incurred in litigation or because of threatened litigation) for any loss, damage or injury, either to a person or to property, resulting from the direct or indirect use of any QA1 products or inability by the buyer to determine proper use or application of QA1 products. With the exception of the limited liability warranty set forth above, QA1 SHALL NOT BE LIABLE FOR ANY CLAIMS, DEMANDS, INJURIES, DAMAGES, ACTIONS, OR CAUSES OF ACTION WHATSOEVER TO BUYER ARISING OUT OF OR CONNECTED WITH THE USE OF ANY QA1 PRODUCTS. MOTORSPORTS ARE DANGEROUS; AS SUCH, NO WARRANTY OR REPRESENTATION IS MADE AS TO THE PRODUCT'S ABILITY TO PROTECT THE USER FROM INJURY OR DEATH. THE USER ASSUMES THAT RISK.
