FOX 2.0 ATS Steering Stabilizer - FOX98302158
Reduce bump steer and prevent death wobble in your Ram 2500 or 3500 truck with the FOX 2.0 ATS Steering Stabilizer shock. Traditional steering stabilizers experience an increase in pressure when turning in one direction causing a steering force as the stabilizer tries to return to its neutral state. This often necessitates the use of dual opposing stabilizers requiring extra mounting hardware and space. The Factory Race Series 2.0 Stabilizer ATS however employs an Adjustable Through Shaft (ATS) design that eliminates fluid displacement throughout the stabilizer's entire travel in both directions. The external piggyback reservoir increases fluid capacity and uses an Internal Floating Piston (IFP) to prevent cavitation by separating the fluid from the nitrogen gas charge. An external adjuster with 24 clicks of adjustment allows for precise tuning to suit any driving style and setup. The outcome is a highly customizable and consistently dampened steering feedback without the need for additional stabilizers providing a simple bolt-on solution.
Features-
- Adjustable Through Shaft (ATS) design cancels unwanted steering forces in both directions
- Takes the place of two conventional opposing stabilizers.
- 24 clicks of adjustability for fine tuning.
- Relocates stabilizer higher and out of the way from damage.
- Direct replacement for stock and aftermarket lifts kits.
BDS Suspension Part # FOX98302158
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
