Product Description
This Trail Lift Kit provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. This Gladiator lift kit has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory lower control arm mounts for an easy installation. The Fabtech lower link arms are constructed of thick wall steel tubing that are guaranteed never to bend. They come with large polyurethane bushings on one end with internal threads on the other to accept the groundbreaking Fabtech 5 Ton Joint? for longevity and a quiet ride. Fabtech?s dual rate Gladiator coil springs are corner specific to the Jeep JT. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip kit along with a heavy duty Track Bar bracket is included. This relocates the Gladiator steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The rear Gladiator suspension receives a heavy duty Track Bar bracket to center the axle under the vehicle with the new ride height and help retain the factory roll center of the vehicle. Front and rear bumps stop extensions protect the Jeep Gladiator suspension from over cycling. This popular Jeep Gladiator lift kit is a top choice for daily drivers that enjoy tackling tough trails and overlanding with the comfort that they have a high quality complete suspension under their Gladiator. Each Fabtech component has been designed with specific features and benefits that cre
Limited Lifetime Warranty
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the Fabtech suspension component product was originally installed, for defects in workmanship and materials.
The Limited Lifetime Warranty excludes the following Fabtech items and is warranted for 1 year from the date of purchase for defects in workmanship: bushings, bump stops, ball joints, bearings, tie rod ends, limiting straps, cross shafts, heim joints, and driveshafts. These parts are subject to wear and are not considered defective when worn.
Shocks
Fabtech Dirt Logic shocks are considered a serviceable shock with a 1 year warranty against leakage and the stainless steel shock body is warrantied for 1 year against corrosion. If a shock fails within the initial year of ownership, the owner must ship the shock to Fabtech for inspection and service. If after examination the shock is determined to have failed due to neglect, damage caused by improper installation, or any reason other than “normal wear and tear,” the owner of the shock will be responsible for all service costs. Costs include labor, parts, and shipping. Fabtech suggests that Dirt Logic shocks be serviced every 30,000 miles or sooner if used in frequent aggressive offroad conditions. Fabtech can provide this service for the shocks click here for information.
Fabtech Performance and Stealth shocks come with a 3 year warranty against leakage. The shock body and mounting ends must be in a non-damaged condition to qualify.
Ride Quality
The Fabtech Dirt Logic shocks are tuned to the vehicle application to provide a comfortable ride quality. Fabtech provides a satisfaction guarantee of this ride quality on all Dirt Logic shocks. For a period of 90 days from the date of purchase, Fabtech will provide one free revalve / tune of the shocks per the customer’s request.
Finish
All Fabtech suspension components come with a 1 year warranty on the powder coat or plated finish of a part against rust or flaking. Finish warranty does not cover discoloration, flaking, or corrosion due to chemical exposure or alteration of the finish including modification to the part. Some finish scrub marks may occur to parts during shipping, which is considered normal and is not covered under warranty.
Bend Proof Link
Fabtech Link Arms for Jeep and Ford Bronco applications have a warranty against bending to the original purchaser on which the vehicle it was originally installed on, for the life of the vehicle or 200,000 miles, or whichever comes first.
5 Ton Joint
Fabtech 5 Ton joints are warrantied against wearing out to the original purchaser on which the vehicle it was originally installed on, for the life of the vehicle or 200,000 miles, or whichever comes first. Wearing out is defined by the inner ball of the joint becoming dislodged and having free movement side to side.
5/60 Powertrain Warranty
For more details CLICK HERE
Vehicle Exclusions
Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. This warranty does not include coverage for police, taxi, first responder vehicles, race vehicles, or vehicles used for government, commercial or fleet purposes. Also excluded from these warranties are sales outside of the United States of America.
Warranty Qualification and Processing
All warranty claims must be approved by Fabtech prior to any action including removal of part for warranty consideration. Please contact Fabtech Customer Service for instructions on how to apply for a warranty claim.
Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the warranty product only. All costs of removal, installation or re-installation, freight charges, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or nonrelated to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse, or misuse as determined by Fabtech.
Fabtech suspension components must be installed as a complete system including shocks as shown on our website. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.
Warnings
Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on-road and off-road, at all speeds. Extreme care should always be taken to operate the vehicle safely to prevent rollover or loss of control resulting in serious injury or death.
Driver and passengers must ALWAYS wear seat belts, avoid quick sharp turns and other sudden maneuvers. Do not operate the vehicle when under the influence of alcohol or drugs as it will impair your ability to safely drive the vehicle both on-highway and offroad. Failure to drive safely may result in serious injury or death to the driver and passengers.
Oversized tires and wheels may decrease the vehicle’s braking capacity. Drivers should always brake early and be aware of the increased stopping distance of the vehicle. Drivers should adjust their driving habits to the effectiveness of the braking. Adjust your driving habits to these changes.
Fabtech makes every effort to ensure the suspension product compatibility with all vehicles listed on the website, but due to unknown auto manufacturer’s production changes and/or inconsistencies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed on Fabtech’s website are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.
Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension, not all vehicles may have the same ride stance front to rear as described in the website and/or factory.
Fabtech suspension and shock absorbers are considered high-performance parts to enhance the driving performance of the vehicle for offroad. Sometimes audible noise may be present from these parts. Fabtech is not responsible for noises associated with its products.
Installation of Fabtech products may void the vehicle's factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.
It is the responsibility of the distributor, seller, and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase. The installer of the suspension product is responsible to adhere the included driver warning decal with the Fabtech product per the installation instructions.
Fabtech reserves the right to super cede, discontinue, change the design, finish, part number, and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or typographical errors within the website or price sheet.
