Product Description
Improving on the Ram suspension design, Fabtech offers their trademark Radius Arms in a complete lift kit system. These exclusive tubular Radius Arms have recognizable dimple die side plates for superior strength and a signature of quality. The rugged Arms provide increased caster for use with oversized tires and lifted suspension heights. The factory front Ram coil spring has a noticeable bow to it with a very high spring rate for the weight rating of the vehicle. This creates a harsh ride with a nervous feel from the suspension. To correct this, Fabtech uses a straight vertical coil design. In order to utilize a straight coil, the lower spring seat mount must be modified via a Fabtech patented angular spring mount that attaches to the stock seat. This eliminates the bow to the spring and allows for a lower rate with a straight coil for a supple ride without sacrificing load carrying capacity. A Fabtech exclusive. For the rear, this lift kit has the perfect balance between ride quality and retaining the factory carrying capacity. By utilizing a dual rate spring design, it provides a good highway ride in the first stage of compression and then the second stage handles heavy loads. Heavy duty 1/4" thick steel front and rear Track Bar drop brackets center the axles under the vehicle with the new ride height. A Fabtech innovation with this Ram lift kit is the heavy duty steel front bump extensions. They retain the stock bump stop cushions for progressive damping and will not allow the suspension to over travel. This is a superior feature compared to replacement long length urethane bump stops as they can push out under harsh conditions. FEATURES: Fabtech?s trademark Radius Arms with recognizable dimple die side plates providing additional strength and increased caster. Front straight Coil Springs with Fabtech?s patented angled mounts for smooth ride. Heavy duty Track Bar drop brackets center the axles under vehicle for proper tracking. Dual rate rear coil spri
Limited Lifetime Warranty
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the Fabtech suspension component product was originally installed, for defects in workmanship and materials.
The Limited Lifetime Warranty excludes the following Fabtech items and is warranted for 1 year from the date of purchase for defects in workmanship: bushings, bump stops, ball joints, bearings, tie rod ends, limiting straps, cross shafts, heim joints, and driveshafts. These parts are subject to wear and are not considered defective when worn.
Shocks
Fabtech Dirt Logic shocks are considered a serviceable shock with a 1 year warranty against leakage and the stainless steel shock body is warrantied for 1 year against corrosion. If a shock fails within the initial year of ownership, the owner must ship the shock to Fabtech for inspection and service. If after examination the shock is determined to have failed due to neglect, damage caused by improper installation, or any reason other than “normal wear and tear,” the owner of the shock will be responsible for all service costs. Costs include labor, parts, and shipping. Fabtech suggests that Dirt Logic shocks be serviced every 30,000 miles or sooner if used in frequent aggressive offroad conditions. Fabtech can provide this service for the shocks click here for information.
Fabtech Performance and Stealth shocks come with a 3 year warranty against leakage. The shock body and mounting ends must be in a non-damaged condition to qualify.
Ride Quality
The Fabtech Dirt Logic shocks are tuned to the vehicle application to provide a comfortable ride quality. Fabtech provides a satisfaction guarantee of this ride quality on all Dirt Logic shocks. For a period of 90 days from the date of purchase, Fabtech will provide one free revalve / tune of the shocks per the customer’s request.
Finish
All Fabtech suspension components come with a 1 year warranty on the powder coat or plated finish of a part against rust or flaking. Finish warranty does not cover discoloration, flaking, or corrosion due to chemical exposure or alteration of the finish including modification to the part. Some finish scrub marks may occur to parts during shipping, which is considered normal and is not covered under warranty.
Bend Proof Link
Fabtech Link Arms for Jeep and Ford Bronco applications have a warranty against bending to the original purchaser on which the vehicle it was originally installed on, for the life of the vehicle or 200,000 miles, or whichever comes first.
5 Ton Joint
Fabtech 5 Ton joints are warrantied against wearing out to the original purchaser on which the vehicle it was originally installed on, for the life of the vehicle or 200,000 miles, or whichever comes first. Wearing out is defined by the inner ball of the joint becoming dislodged and having free movement side to side.
5/60 Powertrain Warranty
For more details CLICK HERE
Vehicle Exclusions
Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. This warranty does not include coverage for police, taxi, first responder vehicles, race vehicles, or vehicles used for government, commercial or fleet purposes. Also excluded from these warranties are sales outside of the United States of America.
Warranty Qualification and Processing
All warranty claims must be approved by Fabtech prior to any action including removal of part for warranty consideration. Please contact Fabtech Customer Service for instructions on how to apply for a warranty claim.
Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the warranty product only. All costs of removal, installation or re-installation, freight charges, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or nonrelated to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse, or misuse as determined by Fabtech.
Fabtech suspension components must be installed as a complete system including shocks as shown on our website. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.
Warnings
Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on-road and off-road, at all speeds. Extreme care should always be taken to operate the vehicle safely to prevent rollover or loss of control resulting in serious injury or death.
Driver and passengers must ALWAYS wear seat belts, avoid quick sharp turns and other sudden maneuvers. Do not operate the vehicle when under the influence of alcohol or drugs as it will impair your ability to safely drive the vehicle both on-highway and offroad. Failure to drive safely may result in serious injury or death to the driver and passengers.
Oversized tires and wheels may decrease the vehicle’s braking capacity. Drivers should always brake early and be aware of the increased stopping distance of the vehicle. Drivers should adjust their driving habits to the effectiveness of the braking. Adjust your driving habits to these changes.
Fabtech makes every effort to ensure the suspension product compatibility with all vehicles listed on the website, but due to unknown auto manufacturer’s production changes and/or inconsistencies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed on Fabtech’s website are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.
Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension, not all vehicles may have the same ride stance front to rear as described in the website and/or factory.
Fabtech suspension and shock absorbers are considered high-performance parts to enhance the driving performance of the vehicle for offroad. Sometimes audible noise may be present from these parts. Fabtech is not responsible for noises associated with its products.
Installation of Fabtech products may void the vehicle's factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.
It is the responsibility of the distributor, seller, and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase. The installer of the suspension product is responsible to adhere the included driver warning decal with the Fabtech product per the installation instructions.
Fabtech reserves the right to super cede, discontinue, change the design, finish, part number, and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or typographical errors within the website or price sheet.
