KRYPTONITE DEATH GRIP TIE RODS 2011-2019 (For Fabtech RTS Lift Kits)
Fits: 2011-2019 2500/3500 GM HD Trucks equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!
Part# KRTR11-FT
*These Tie rods are built Specifically for the 2011-2019 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!
*Will Not Fit an OEM Knuckle.
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available
Engineered exclusively for the extreme demands of today's heavy duty truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2019 2500/3500 GM HD Truck that has the center link mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rods easily outperform the competition.This pair is for use with your factory center link.
These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.
Details:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.
- Solid 1 1/4" Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjust ability.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Warranty Coverage Details
*Your product(s) must be purchased either directly, or through one of our authorized dealers.
**Your product(s) must be registered within 90 days of purchase. Registration will take place at kryptoniteproduct.com Click the warranty tab on the home page and follow to Warranty Registration link. Proof of purchase will be required. Without this information and warranty claims will be void. Without proper registration of you part(s) you will NOT be covered.
***Warranty covers product replacement only. Warranty will never be a parts cost refund. warranty will never cover any collateral damage costs.
If you believe you have a part that failed and may be covered under warranty, you must first make a warranty claim. Once you have submitted your claim information you will be contacted within 2 business days with further instructions.
*All parts to be considered for warranty replacement must first be physically inspected by a representative of KRYPTONITE PRODUCTS. If the part(s) in question are deemed to have failed in a way other than installation/user error. The customer will be provided with a replacement part(s) of equal or improved quality.
No replacement parts will ever be provided to a customer before a physical inspection of the failed part(s) by a KRYPTONITE PRODUCTS representative.
(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, wreck it, lift it, lower it, sled pull it, I think you get it? We don’t care. If you can break it we will replace it.
*Warranty Excludes Heim style joints, Dust Boots, Shocks, Sensor Wires and Bushings of any kind as these are regular maintenance type items.
