KRYPTONITE DEATH GRIP TIE ROD ENDS (PAIR) 1/2 TON TRUCK 6 LUG 2014-2019
Part# KR800948-2
Fits: 2014-2018 1500 Silverado, Sierra. And 2015-2019; Escalade, Avalanche, Suburban, Tahoe, Yukon.
"THESE TIE RODS FIT ONLY STEERING RACK EQUIPPED 2014 AND NEWER 1/2 TON MODELS, NO REMOVAL OF INNER TIE ROD IS REQUIRED. TIE ROD IS AN OE REPLACEMENT AND DOES NOT WORK WITH LIFT KITS THAT REQUIRE SPECIALTY TIE ROD ENDS"
Engineered exclusively for the Extreme demands of today's Heavy Duty Truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite Death Grip tie rod ends will fit any 2014-2018 GM 1/2 Ton Truck Steering Rack equipped. These Tie rods will not fit a truck with Center Link found before 2007.
Using superior components and engineering, these tie rods easily outperform the competition.
This Listing is for a pair of 2 Outer Tie rod ends, as seen in photo.
DETAILS:
Heat treated chromoly nickel outer studs.
Bulletproof, all steel inner ball sockets.
Solid 1" Hexagon steel body.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Warranty Coverage Details
*Your product(s) must be purchased either directly, or through one of our authorized dealers.
**Your product(s) must be registered within 90 days of purchase. Registration will take place at kryptoniteproduct.com Click the warranty tab on the home page and follow to Warranty Registration link. Proof of purchase will be required. Without this information and warranty claims will be void. Without proper registration of you part(s) you will NOT be covered.
***Warranty covers product replacement only. Warranty will never be a parts cost refund. warranty will never cover any collateral damage costs.
If you believe you have a part that failed and may be covered under warranty, you must first make a warranty claim. Once you have submitted your claim information you will be contacted within 2 business days with further instructions.
*All parts to be considered for warranty replacement must first be physically inspected by a representative of KRYPTONITE PRODUCTS. If the part(s) in question are deemed to have failed in a way other than installation/user error. The customer will be provided with a replacement part(s) of equal or improved quality.
No replacement parts will ever be provided to a customer before a physical inspection of the failed part(s) by a KRYPTONITE PRODUCTS representative.
(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, wreck it, lift it, lower it, sled pull it, I think you get it? We don’t care. If you can break it we will replace it.
*Warranty Excludes Heim style joints, Dust Boots, Shocks, Sensor Wires and Bushings of any kind as these are regular maintenance type items.
