74-90 Sj/Gd Wag 4/3 Block Kit - BDS403H

$766.65
SKU:
BDS403H
Free Shipping Eligible
Minimum Purchase Required
SKU:
BDS403H
BDS403H will update the style of your Jeep Cherokee SJ Full Size Wagoneer and Grand Wagoneer with this 4-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 33" tires. Up front the lift kit includes Glide-Ride leaf springs brake line brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Glide-Ride Leaf Springs
Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features-

  • Tapered and roll-pointed leafs add flexibility and provide an even deflection rate
  • Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place
  • Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex
  • Multi-leaf progressive design for smooth ride
  • Anti-friction pads provide a smooth and quiet ride
  • Details-

  • Front Lift Height: 4 IN
  • Front Lift Method: Leaf Springs
  • Installation Difficulty: moderate
  • Installation Time: 6 Hrs
  • Installation Tools: Torque Wrench-jack hydraulic-puller pitmanArm
  • Rear Lift Height: 3 IN
  • Rear Lift Method: Block
  • Rear Lift Option: Block Kit
  • Shocks Included: Yes
  • Notes-

  • 083402 Pitman arm will increase turning radius. (cannot turn as sharp)
  • Not recommended for Wagoneers or Cherokees with front and/or rear track rods.
  • 1974-1975 models must have 131" wheelbase and 7200# GVWR or more for #004408 rear springs to fit.
  • Some 1974 J20s with stock 401 come with a rear 15/16" spring eye stud.
  • #004402 and #004408 come with OE rubber bushings installed.
  • Rear shock mount may need to be relocated.
  • If equipped with Dana 44 rear axle will require a 9/16 X3-1/4" X 7-1/2" rear u-bolt. (Not supplied by BDS)
  • Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.

    Reviews & Questions