Transform the way your 1967–1970 Mustang performs and feels with QA1’s Level 2 Full Vehicle Handling Kit. This complete suspension system is engineered to deliver modern ride comfort, sharper handling, and precise adjustability - all in a package designed to bolt on with minimal modification. Built for restomods, street cars, and pro-touring builds, this kit brings the kind of handling and control today’s drivers expect, while keeping the timeless character of your classic Mustang.
ENGINEERED FOR MODERN HANDLING
The 1967–1970 Mustangs were larger and heavier than their early counterparts, and QA1’s Level 2 kit is tuned specifically to handle that extra weight while improving balance and response. The triangulated 4-link rear suspension eliminates the flex and wheel hop associated with leaf springs, while the front coilover system delivers improved geometry and steering feel.
HANDLING YOU CAN DIAL IN
Double adjustable coilovers allow independent control over compression and rebound, so you can fine-tune ride quality and performance for your exact driving style - whether that’s highway cruising or weekend corner carving.
DESIGNED FOR EASY INSTALLATION
The front suspension installs directly to factory mounting points, retaining the stock shock towers for a clean, OE-style appearance. The rear 4-link system requires welding, but QA1’s self-fixturing brackets simplify the process, ensuring proper alignment and repeatable geometry.
Features:
- Application-specific fit for 1967-1970 Ford Mustangs
- Complete front and rear suspension upgrade in one package
- Double adjustable QA1 Pro Coil shocks for independent compression and rebound control
- Tubular upper and lower control arms for improved strength and geometry
- Triangulated 4-link rear system replaces leaf springs for superior traction and comfort
- Self-fixturing weld-in rear brackets for easier installation
- Adjustable front ride height: stock to –2”
- Adjustable rear ride height: stock to –3”
- Front and rear sway bars reduce body roll and improves cornering response
- All hardware and brackets included
- Durable powder-coated components
Notes:
- Fits 1967–1970 Ford Mustangs
- Adjustable front ride height: stock to –2”
- Adjustable rear ride height: stock to –3”
- Rear 4-link requires welding for installation
- Includes self-fixturing weld-in rear brackets
- Front suspension installs using factory mounting points (no cutting or modification required)
WARRANTY / DISCLAIMER
QA1 warrants that the products will be free from defects in material and workmanship for one year from date of sale to the original purchaser. A limited lifetime warranty is offered on select shock absorbers. For registration and more information on the limited lifetime warranty, please visit https://www.qa1.net/Warranty. QA1 makes no other warranty of any kind, express or implied. QA1 shall have no obligation under the foregoing warranty where the defect is the result of improper or abnormal use, your negligence, vehicle accident, improper or incorrect installation or maintenance, nor when the product has been repaired or altered in any way. QA1's liability in the case of defective products subject to the foregoing warranty shall be limited to the repair or replacement, at QA1's option, of the defective products. Consequential or incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- QA1, in its sole discretion, shall determine whether or not any Eligible Product is defective or otherwise covered by this warranty.
- If the Eligible Product fails to perform properly due to defective materials or workmanship, QA1 will at its option either (i) repair the Eligible Product without charge, or (ii) replace the Eligible Product. If the Eligible Product is no longer available, QA1 will replace the Eligible Product with an equivalent product. No refunds will be provided.
- The warranty provided by QA1 does NOT apply if the Eligible Product fails to perform:
- due to cosmetic wear and tear from normal use;
- due to improper or abnormal use, abuse, neglect, negligence, vehicle accident, insufficient travel, improper or incorrect installation or maintenance; or
- when the Eligible Product has been repaired, replaced, substituted or altered in any way, or if used with parts other than genuine parts of QA1.
- QA1 is not responsible for installation or removal labor, or for any other repair charges associated with the Eligible Product.
- Customer pays shipping to QA1 for final determination on eligibility. Any repaired or replaced Eligible Product will be returned to customer excluding freight cost.
- QA1 shall not be liable for the loss of use of the Eligible Product, loss of time, inconvenience, commercial loss or any other indirect, consequential, special or incidental damages due to breach of the above limited lifetime warranty. QA1 makes no warranties of any kind, express or implied, other than as herein expressly provided, and specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Notwithstanding anything set forth herein to the contrary, QA1’s liability hereunder shall be limited to the purchase price of the Eligible Product.
In order to be eligible for service under this warranty, you must return the defective part to QA1 together with a RMA. number issued from QA1. Tag each item with the part number and the specific explanation of defect. We will inspect the part and determine: a) if it is eligible for repair or replacement; and, b) if so, whether to repair or replace it. All returns must be shipped prepaid to: QA1 Precision Products, Inc., RMA#__________, 9574 217th Street West, Lakeville, MN 55044.
THE BUYER UNDERSTANDS AND EXPRESSLY RECOGNIZES that racing parts, specialized street rod equipment, rod end bearings, and ALL parts and services sold by QA1 are exposed to many and varied conditions due to the manner in which they are installed and used. BUYER ACKNOWLEDGES that QA1 does not have full knowledge of the intended use of the goods, and BUYER WILL DEFEND AND INDEMIFY QA1 upon demand against all claims, actions, liability, loss and expense (including investigating expense and attorney fees incurred in litigation or because of threatened litigation) for any loss, damage or injury, either to a person or to property, resulting from the direct or indirect use of any QA1 products or inability by the buyer to determine proper use or application of QA1 products. With the exception of the limited liability warranty set forth above, QA1 SHALL NOT BE LIABLE FOR ANY CLAIMS, DEMANDS, INJURIES, DAMAGES, ACTIONS, OR CAUSES OF ACTION WHATSOEVER TO BUYER ARISING OUT OF OR CONNECTED WITH THE USE OF ANY QA1 PRODUCTS. MOTORSPORTS ARE DANGEROUS; AS SUCH, NO WARRANTY OR REPRESENTATION IS MADE AS TO THE PRODUCT'S ABILITY TO PROTECT THE USER FROM INJURY OR DEATH. THE USER ASSUMES THAT RISK.
