22-23 Tundra 0-1.5”/23 Sequoia 0-3" Lift 2.5 RR Rear Shocks w/CDCV Pair - ICON 57840CP

$1,499.95
SKU:
57840CP
UPC:
840103414690
Free Shipping Eligible
Minimum Purchase Required
SKU:
57840CP
UPC:
840103414690

22-23 Tundra 0-1.5”/23 Sequoia 0-3" Lift 2.5 RR Rear Shocks w/CDCV Pair - ICON 57840CP

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are fully rebuildable and re-tunable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.

Features:

  • ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
  • ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
  • Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
  • Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
  • Nitrogen charged monotube design with piggyback reservoir
  • One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • PTFE lined spherical bearings and application specific mounting hardware
  • 6061 aircraft grade aluminum CNC machined components
  • Attributes:

    • Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
    • Adjustable: Yes
    • Boot Included: NO
    • Bore Diameter: 2.25IN
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Cylinder Color: Grey
    • Cylinder Material: Aluminum
    • Damping Adjustment Type: Manual
    • Damping Type: Oil
    • External Reservoir: Yes
    • Gas Charged: Yes
    • Grade Type: Performance
    • Lower Mount Type: Eyelet
    • Mounting Hardware Included: Yes
    • Service Parts: 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
    • Shaft Diameter: 0.875IN
    • Shaft Material: Chrome
    • Shock Absorber Body End Measuring Point: Shoulder of Stem
    • Shock Absorber Rod End Measuring Point: Center of Eylet
    • Tube Outside Diameter: 2.5IN
    • Upper Mount Type: Stem

    Notes:

    • TECH NOTE: Compatible with 0-1.5” of rear lift on non-TRD Tundras or 0-1" lift on TRD Tundras equipped with rear coil springs
    • TECH NOTE: Compatible with 0-3” of rear lift on Tundras equipped with rear OE Load-leveling Rear Height Control Air Suspension
    • TECH NOTE: Compatible with 0-3” of rear lift on 2023 Sequoias equipped with rear coil springs
    • TECH NOTE: If upgrading a vehicle equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions