SKU:
BDS123302
UPC:
00711745604155
BDS123302 will lock in your Ford Broncos alignment specs with these cam lockout plates from BDS Suspension. Specially designed to not rotate under extreme use like the factory cams these replacement cam bolts and lock-out plates are a direct bolt-in replacement for stock or lifted Broncos. They feature 15-lockout positions to correct your alignment specs at a wide range of ride heights and can be used in combination with stock or aftermarket control arms. Laser-cut steel construction finished in a durable black e-coating ensures strength and durability under your Ford Bronco.Tapered and roll-pointed leafs add flexibility and provide an even deflection rate Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex Multi-leaf progressive design for smooth ride Anti-friction pads provide a smooth and quiet ride Adjustable: Yes Installation Time: 1 Hr Pvg Product Status: Active Will NOT fit Bronco Sport. These cam styles are uncommon for a typical alignment shop. Once installed to adjust the alignment the nuts must be loosened and the bolt / cam plate slid past the pins in the frame and adjusted to the new position. Although these are not as easy to initially adjust these will provide a locked in position that will not allow the alignment to slip when used in offroad situations.
Features-
Details-
Notes-
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
