2017-Up Ford F250/F350 SD 4WD 0-3” Lift Rear 2.5 VS PB/CDEV Shocks Pair - ICON 37705EP

$1,899.95
SKU:
37705EP
UPC:
840103414485
Free Shipping Eligible
Minimum Purchase Required
SKU:
37705EP
UPC:
840103414485

2017-Up Ford F250/F350 SD 4WD 0-3” Lift Rear 2.5 VS PB/CDEV Shocks Pair - ICON 37705EP

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are fully rebuildable and re-tunable. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.

Features:

  • ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
  • ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
  • One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
  • Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
  • One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • PTFE lined spherical bearings and application specific mounting hardware
  • 6061 aircraft grade aluminum CNC machined components
  • Fully rebuildable and re-tunable
  • Attributes:

    • Adjustable: Electronically
    • Boot Included: NO
    • Bore Diameter: 2.25IN
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Cylinder Color: Grey
    • Cylinder Material: Aluminum
    • Damping Type: Oil
    • External Reservoir: Yes
    • Gas Charged: Yes
    • Grade Type: Performance
    • Lower Mount Type: Eyelet
    • Mounting Hardware Included: Yes
    • Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
    • Service Parts: 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
    • Service Parts: 191015 - 10" FINNED RESI UPGRADE KIT
    • Service Parts: 257342 - 7/8 SHAFT 16.85 OAL, 12.00 TRAVEL
    • Shaft Diameter: 0.875IN
    • Shaft Material: Chrome
    • Shock Absorber Body End Measuring Point: Center of Eylet
    • Shock Absorber Rod End Measuring Point: Center of Eylet
    • Tube Outside Diameter: 2.5IN
    • Upper Mount Type: Eyelet

    Notes:

    • TECH NOTE: Compatible with 0-3” of rear lift over stock
    • TECH NOTE: Also requires installation of IIC part number 93500 and CDEV front shock part number 67800EP or CDEV front coilover kit part number 61720E

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions