2017-20 Ford Raptor Front 3.0 VS Remote Reservoir/CDCV Coilover Kit - ICON 95002

2017-20 Ford Raptor Front 3.0 VS Remote Reservoir/CDCV Coilover Kit - ICON 95002

$3,816.10
SKU:
95002
UPC:
840103407128
Free Shipping Eligible
Minimum Purchase Required
SKU:
95002
UPC:
840103407128

2017-20 Ford Raptor Front 3.0 VS Remote Reservoir/CDCV Coilover Kit - ICON 95002

The front end geometry of the Gen 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. All of these features work together to deliver the perfect blend of on-road comfort and off-road performance.

Features:

  • Adjustable coilovers yield 1-3” of front lift height
  • Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions
  • Superior low speed control reduces body roll and increases on-road stability
  • Easy-to-adjust CDC Valve has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups
  • ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
  • 10" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping
  • Barreled coil spring design maximizes travel and provides more efficient packaging
  • High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
  • Heavy duty CNC machined 1” shock shafts

    • Attributes:

    • Add-On Part: 95199 - 19-20 RAPTOR DAMPER INTERFACE DEVICE
    • Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
    • Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
    • Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
    • Adjustable: Yes
    • Adjustable Damping: Yes
    • Adjustable Height: Yes
    • Body Diameter: 3IN
    • Boot Included: No
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Coil Over Springs Included: Yes
    • Damping Type: Oil
    • Dust Shield: No
    • Gas Charged: Yes
    • Grade Type: Performance
    • Lower Mount Type: Eyelet
    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Tires: 35 x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625" Backspace / 16mm Offset
    • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
    • Remote Reservoir: Yes
    • Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
    • Service Parts: 611019 - COILOVER HARDWARE KIT PAIR
    • Service Parts: 252003 - SEAL INSTALL TOOL 2.5/3.0
    • Service Parts: 252002 - UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0)
    • Shaft Diameter: 1IN
    • Shock Absorber Body End Measuring Point: Top of Upper Mount Plate
    • Shock Absorber Rod End Measuring Point: Center of Eylet
    • Spring Color: Black
    • Spring Material: Steel
    • Upper Mount Type: Mounting Plate

    Notes:

    • OEM Wheels & Tires Fitment: Yes
    • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 5" BS / 6mm Offset
    • Recommended Aftermarket Tires: 35X12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
    • TECH NOTE: 2019-2020 VEHICLES WITH FACTORY LIVE VALVE SHOCKS WILL NEED AN ICON DAMPER INTERFACE DEVICE (PN: 95199) TO ALLOW THE VEHICLE DRIVE MODES TO OPERATE CORRECTLY WITH THE OE SHOCKS REMOVED.

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    RELATED PRODUCTS

    Reviews & Questions

    !