2010-14 Ford Raptor RXT 3.0 Zeta Piggyback Reservoir Shocks Pair - ICON 95200

$2,999.95
SKU:
95200
UPC:
840103407180
Free Shipping Eligible
Minimum Purchase Required
SKU:
95200
UPC:
840103407180

2010-14 Ford Raptor RXT 3.0 Zeta Piggyback Reservoir Shocks Pair - ICON 95200

ICON Vehicle Dynamics is known for its extensive research and development put into every product, the revolutionary outcome of this research is what sets ICON apart from the off-road industry standard. The Ford SVT Raptor was the first production truck, designed & built, to bridge the gap between a standard street “pickup truck” and an off-road pre-runner. ICON Vehicle Dynamics new 3.0 Zeta Piggyback Reservoir 3 Tube Bypass Shocks for the SVT Raptor were rigorously tested both on- and off-road for several months to enhance the overall performance and ride quality. Our Rear Zeta Ford SVT Raptor Shocks are a true 3.0” (inside and out), three tube External Bypass shock. These are far from the norm when compared to a traditional bypass shock you see on Trophy Trucks and other off-road race vehicles. Each bypass valve has a specific port design and individually equipped with a different spring rate to ensure proper performance at each zone of shock travel. These same bypass valves feature dampened valve stops for quiet and precise operation. That means no clicking noises as you hit bumps or road chatter driving down the road. The biggest difference in these shocks versus an industry standard bypass shock, are the “Easy-to-Adjust” knobs and the replaceable bypass tubes. The “Easy to Adjust” Hi Resolution Clicker Knobs do not require any tools for adjustment, and can be adjusted in seconds from plush off-road performance to firm on road manners for extra control while driving the mountains or towing a trailer. Another unique feature of this shock is the replaceable bypass tubes that can be swapped out during a standard rebuild if any damage were to occur, where a normal bypass shock body would need to be completely replaced, saving you hundreds of dollars.

Features:

  • 3.0 OEM Replacement PiggyBack Reservoir Zeta 3 Tube Bypass Rear Shocks
  • Easy-to-Adjust Detented Adjustment Knobs Offer Quick Adjustability without the Use of Tools
  • High Flow CNC Machined Welded Bypass Blocks designed to Increase Fluid Flow for Enhanced Performance & High Definition Tuning
  • High Resolution Bypass Valves Designed for Noticeable Fine-Tuning of Rebound and Compression Damping
  • Replaceable Bypass Tubes That Can Easy Slide in to Position if you were to Dent or Damage One
  • Direct Bolt in to OEM Location with Bypass Adjustment Knobs Easily Accessible for Tuning AdjustmenT
  • Special Engineered Damped Valve Stops for Quiet and Precise Operation without the Standard Bypass Loud “Clicking” Noise you'll find with Other Brands
  • Multi Stage Cad Plated Finish with Polished and Anodized Top Cap / Rod Ends
  • UHMH Machined Shaft & Rod End Protective Shin Guards Standard with Every Kit
  • Attributes:

    • Adjustable: Yes
    • Boot Included: yes
    • Bore Diameter: 2.75IN
    • California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
    • Cylinder Color: Silver
    • Cylinder Material: Steel
    • Damping Type: Oil
    • External Reservoir: Yes
    • Gas Charged: Yes
    • Grade Type: Performance
    • Lower Mount Type: Eyelet
    • Mounting Hardware Included: Yes
    • Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
    • Service Parts: 252002 - UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0)
    • Service Parts: 302005 - 3.0 ICON REBUILD KIT (ALL)
    • Service Parts: 252003 - SEAL INSTALL TOOL 2.5/3.0
    • Shaft Diameter: 1IN
    • Shaft Material: Chrome
    • Shock Absorber Body End Measuring Point: Center of Eylet
    • Shock Absorber Rod End Measuring Point: Center of Eylet
    • Tube Outside Diameter: 3IN
    • Upper Mount Type: Eyelet

    ICON offers a lifetime warranty on all non-wearable components, springs, and weldments.

    ICON's shock warranty is limited to manufacture defect for 12 months from the date of purchase.

    The ICON Delta Joint features a 5-year limited warranty (when used with a complete ICON suspension system).

    The ICON Delta Joint Pro features a 12 month limited warranty (when used with a complete ICON suspension system).

    ICON Alloy warranty is limited to manufacture defect for 12 months from the date of purchase and feature 12-month warranty on chrome finish surfaces as well as a 24-month warranty on painted surfaces.

    Please note that the warranty applies to the parts only. Labor, alignment etc. is not covered under this warranty.

    Contact ICON tech support for more details, (951) 689-ICON.

    Reviews & Questions