2009-2018 Dodge RAM 1500 4WD 3 /5" Lowering Kit - IHC-R0918CK4-35
Looking to drop the front of your 2009-2018 Dodge RAM 1500? No worries! IHC Suspension has got you covered! Simply add this 3" drop control arm kit to lower the front of your truck a full 3 inches! All you have to do is swap your control arms out and you will have the front drop you want! IHC control arms run Delrin bushing for maximum performance, extended bushing life, and minimal maintenance. The rear is lowered with 4” progressive springs that will require to be trimmed from the topside to achieve 5” 6” or 7” drop. Keep in mind these are progressive springs and are the only springs in the industry that can be cut and will NOT affect ride quality. Dropdown trac bar bracket and shorter sway bar links are included to correct angles. The key feature of this kit is the 4 link relocation brackets. These brackets recenter rear end to fender well and correct pinion angle. Eliminating high-speed wobble and swaying. CUT Kit is required for 6” and 7” rear drops. This will allow more travel from the frame to the axle and prevent bottoming out. With the Cut kit, you are cutting OEM upper trailing arm bracket OFF to allow more travel. No more headaches or issues! Simple bolt on with no mods needed!
This 3/5 Lowering Kit Includes-
Front-
- Upper Drop Control Arms (Pair)
- Brand New
- Lifetime Warranty
- New Ball Joints
- New Control Arm Bushings (Delrin)
- Ball Joint Nut & Cotter Pin
- Lower Drop Control Arms (Pair)
- Brand New
- Lifetime Warranty
- New Ball Joints
- New Control Arm Bushings (Delrin)
- Ball Joint Nut & Cotter Pin
Rear-
- Relocation Bracket
- Progressive Springs
- Drop Shocks
- Sway Bar Links
Notes-
- CUT Kit is recommended for 5” 6” and 7” rear drops.
- Complete Kit No Extra Parts Needed
- Maintains Factory Ride Quality
- Simple Bolt On
- Lifetime Warranty On Metal Parts
- Made In The USA
- Old Part Number IHC-0918CK-4WD
Fits-
- 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge RAM 1500 4WD
