SKU:
K882443
Ships Next Monday
2009-2018 Dodge RAM 1500 2wd 4.5/3" MaxTrac Lift Kit W/ Shocks - K882443
MaxTrac Suspension K882443 offers a 4.5" lift spindle for the 2009-2018 Dodge RAM 1500 2wd platform. Designed from a single piece of ductile iron, it provides strength with a bolt on application. The spindle is also e-coated for corrosion protection, includes extended brake lines (DOT approved), and is backed by a limited lifetime warranty. The lift kit also comes with rear coils, sway bar extension brackets, track bar drop down bracket, and MaxTrac rear shocks. The RAM kit will allow factory wheels & tires to bolt back on. This kit is made using the highest quality materials, so expect a great ride along with the additional lift you are looking for. Below you will find all of the specifics on this lift kit-
Kit Includes-
- Front 4.5" Lift Spindles
- With DOT Approved Extended Brake Lines
- Rear 3" Lift Coils
- Made In The USA
- Track Bar Drop Down Bracket
- Made In The USA
- Sway Bar Extension Brackets
- Made In The USA
- Rear MaxTrac Shocks
- Made In The USA
This Kit Will Lift Your Vehicle-
- 4.5" In The Front
- 3" In The Rear
Wheel and Tire Fitment-
- Clears Up 35" Tires With Correct Wheel and Tire Combination
- 17" Wheel or Larger
- Recommended 5.5" Backspace or Less
Notes-
- Fits 2wd Models ONLY
Install Time-
- 6 Hours
Fits-
- 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge RAM 1500 2wd V6
- 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge RAM 1500 2wd V8
MaxTrac Suspension Part # K882443
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac's specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac's liability and customer's exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac's option and in Max Trac's sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.