BDS123251 will upgrade those weak factory stamped arms on your 2005-2022 Ford F250 or F350 Super Duty 4WD with the BDS heavy duty Radius Arm upgrade. Add strength functionality and styling when you upgrade to the BDS tubular steel Radius Arms for your Ford Super Duty. These radius arms are designed to correct the suspension geometry when used with 2-6" lift kits. These HD radius arms are a massive upgrade to the factory stamped steel arms offering more strength better clearance and caster correction for lifted applications. Built from 1-3/4" OD heavy wall tubing these arms are gusseted and fully welded for superior strength along with a larger OE-style rubber bushing to isolate NHVs with zero maintenance needed. The design offers additional tire clearance along with more ground clearance over drop brackets. The arms have lower cam slots for easy caster adjustment.
Features-
- Tapered and roll-pointed leafs add flexibility and provide an even deflection rate
- Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place
- Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex
- Multi-leaf progressive design for smooth ride
- Anti-friction pads provide a smooth and quiet ride
Details-
- Bushing Material: Rubber
- Bushings Included: Yes
- Installation Time: 2-3 Hrs
- Lift Height: 2-4 IN
- Material: Steel
- Pvg Product Status: Active
Wearable Parts - Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
