2" Leveling Kit FOX 2.0 Coil-over 4WD - BDS1913FSL

2" Leveling Kit FOX 2.0 Coil-over 4WD - BDS1913FSL

$2,290.75
SKU:
BDS1913FSL
UPC:
840416410808
Free Shipping Eligible
Minimum Purchase Required
SKU:
BDS1913FSL
UPC:
840416410808

2" Leveling Kit FOX 2.0 Coil-over 4WD - BDS1913FSL

Level out your 2021-2024 Ford F150 truck and improve the ride with this 2-inch leveling kit featuring FOX 2.0 coil-over shocks from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires. Up front the lift kit includes FOX 2.0 Performance Series coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a matching set of FOX 2.0 Performance shocks for the smoothest ride. FOX 2.0 Coil-Over Shocks These FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut. They feature a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion along with an internal floating piston (IFP) to eliminate oil aeration FOX's proprietary internals 5/8" hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation. HD Upper Control Arms Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Features-

  • FOX Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tuned precision valving
  • HD Upper control arms provide superior strength and proper alignment
  • Adjustable height to fine tune
  • Provides level stance from front to rear
  • Easy 100% Bolt On installation
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments.

Details-

  • Installation Time: 3 Hrs
  • Installation Difficulty: moderate
  • Installation Tools: ballJointSeparationTool
  • Rear Lift Height: 0IN
  • Front Lift Method: Coil Over
  • Rear Lift Method: Stock
  • Front Lift Height: 2IN
  • Adaptive Headlights: Yes
  • Shocks Included: Yes

Notes-

  • Works with bar pin lower strut mounts. For eye-style lower strut mounts use 2009-13 model kits.
  • Control arms with sensors are designed to keep the sensor arm in the stock position (the same position as the OE control arm).
  • Not designed to work with trucks with CCD.
  • Do NOT hit the aluminum knuckle on later model trucks with a hammer to separate the ball joint. Use the appropriate ball joint separation tool.
  • For replacement ball joints use BDS081203. The ball joint is directional and must be installed with the dot facing either inward or outward on the vehicle otherwise damage may occur.
  • Special Service Tool 204-592 is recommended to dislodge the ball joint.


BDS Suspension Part # BDS1913FSL

Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.

RELATED PRODUCTS

Reviews & Questions

!