1997-2006 Jeep Wrangler (TJ) Rear Shocks Stainless Brakelines - BDS104009

$55.95
SKU:
BDS104009
UPC:
00658848618651
Free Shipping Eligible
Minimum Purchase Required
SKU:
BDS104009
UPC:
00658848618651
BDS104009 will improve safety and style by upgrading the rear brake lines on your 1997-2006 Jeep Wrangler TJ with a set of BDS rear brake lines. Specially designed for vehicles with a 3 to 6.5-inch lift these rear brake lines are built with stainless steel braided hose and feature a kevlar liner for an improved brake pedal feel. These UCAs can be used with BDS lift kits and other lift kits on the market. The brake lines use a one-piece crimped design with 4 levels of protection allowing these brake lines to take abuse on and offroad. The teflon inner core is approved for use with all brake fluids including D.O.T. 5 Silicone. BDS brake lines are flexible and resist kinking better than stock lines.

Features-

  • Tapered and roll-pointed leafs add flexibility and provide an even deflection rate
  • Increased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place
  • Higher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex
  • Multi-leaf progressive design for smooth ride
  • Anti-friction pads provide a smooth and quiet ride
  • Details-

  • Brake Hose Quantity: 2
  • Hose Fitting Type: Standard SAE female
  • Hose Length: 26 IN
  • Hose Material: Kevlar lined Stainless Steel
  • Installation Time: 1 Hr
  • Lift Height: 3_6_5 IN
  • Pvg Product Status: Active
  • Wearable Parts - Limited Lifetime Warranty BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty. BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.

    Reviews & Questions