1973-1979 Ford F-100 Complete HQ Air Suspension Handling Kit - Ridetech 12330298
Introducing the ultimate suspension solution for vintage Ford F-100 and F-150 enthusiasts - Ridetech's 1973-1979 Ford F-100 Complete HQ Air Suspension Handling Kit. Designed to conquer the challenges posed by these classic trucks, Ridetech has crafted a system that combines unmatched ride quality and handling, exceeding all expectations.
In the era when these trucks were born, speed limits were lower and heavy-duty work was the norm. The original twin I-beam front suspension, while undeniably "Ford tough," was not engineered for nimble corner-carving. Lowering the front suspension in these trucks has traditionally posed a problem, but Ridetech's team loves a low-slung truck. Hence, they embarked on a mission to develop the finest handling suspension for vintage Ford trucks, all while ensuring that it could be installed by enthusiasts using basic tools and a bit of elbow grease.
Unlike the factory front crossmember, Ridetech offers a bolt-on front crossmember solution that removes the entire stock unit. Boldly built for unparalleled durability, this front suspension system is significantly stronger and stiffer than the original, aligning perfectly with the frame's original rivet holes. Some additional drilling is required to accommodate the numerous Grade 8 fasteners included in the kit. The Ridetech system also incorporates the widely available "Fox Mustang" style steering rack, making maintenance and parts sourcing a breeze. With pre-installed ball-joints and delrin bushings, the control arms ensure smooth, noise-free operation for extended periods. Moreover, the suspension system provides versatile caster options, allowing truck enthusiasts to dial in the desired level of aggressiveness.
When compared to other suspension options, such as salvaged "crown vic" components or street rod setups, Ridetech's system brings unparalleled structural integrity and uncompromised suspension geometry. This translates into an exceptional ride quality and handling experience while preserving the original frame. At the rear, Ridetech's tried and tested 4-link design delivers the desired low stance without sacrificing bed floor space or load capacity. Accompanying this design is the Ridetech bolt-in c-notch, reinforcing the strength of the stock frame and featuring all the necessary mounts for the new control arms and panhard bar.
Experience the ultimate in vintage Ford truck suspensions with Ridetech's 1973-1979 Ford F-100 Complete HQ Air Suspension Handling Kit. Prepare to be amazed by the superb ride quality, unparalleled handling, and the simplicity of installation with basic tools. Upgrade your classic Ford truck today and unleash its full potential on the road.
Features:
- Removal of bulky, heavy, and poor handling twin I-beam suspension
- Bolt-in cradle that strengthens the front of the truck and provides structural mounts for front control arms
- Utilization of substantial "H" style design in comparison to other "I" style crossmembers
- Superior suspension geometry without compromises
- Inclusion of Delrin bushings on upper and lower control arms for smooth and squeak-free long life
- Upper control arm cross shaft allows for easy alignment and use of caster slugs
- Adjustable steering stop on lower control arm
- Utilization of Ridetech tall "pin" spindle and "AFX brake kits" for increased camber gain and improved stability
- Front width of 63.5", providing options for "traditional" offset wheel choices
- Compatibility with 14 inch and larger wheels
- Motor mount "loops" that connect cradle to frame rails to reinforce the frame
- Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS, Small Block, and Big Block
- Installation of a front sway bar measuring 1.5" x .250 wall for confident cornering and smooth ride
- Adjustable bump stops
- Rack and pinion steering conversion with 15.5" center to center bushing mounts for 79-93 Mustang style steering rack
- Inclusion of billet adjustable tie rods
- Virtually elimination of bump steer
- Possibility to adapt to a stock steering column using kit 12319505, which includes a column adapter, U-Joint, and shaft
- High-quality satin black powder coat finish
- Approximate weight reduction of 130lbs in the front of the truck
- Removal of factory leaf spring suspension and bracketry for the rear 4-Link Suspension
- Complete parallel 4-link with panhard and c-notches
General Warranty
Ridetech offers a full 1 year, non-transferable warranty from the date of purchase on all products. In the event that a product is out of the warranty time period, we will evaluate and respond to the customer’s concerns on a case-by-case basis.
Shock Absorber Warranty
Ridetech shock absorbers now have a 1,000,001-mile warranty! We are so confident of the performance and durability of our new shock absorbers, Ridetech offers a 1,000,001-mile lifetime warranty on all Ridetech shocks purchased after Jan. 1 2013.
- Obvious external damage will not be warranted [accident, component abrasion, etc.]
- You will need to ship your worn-out shocks directly to Ridetech for evaluation and repair. You pay for your shipping, and Ridetech will pay for return shipping.
- Ridetech is not responsible for any removal or installation charges. Ridetech is not responsible for any other repairs or damage that might happen to your car.
Return Policy
Return Policy Returns of new (re-sellable) products within 30 days of receipt of the product are subject to a 10% restocking fee. Returns of new (re-sellable) products after 30 days of receipt of the product are subject to a 20% restocking fee. All returns must be accompanied by the original purchase order or invoice number. All returns require notification of the return in the form of a Return Merchandise Authorization (RMA#) prior to shipment. All shipping charges are the responsibility of the customer. No returns on electrical components are accepted after 30 days. Returns of discontinued or obsolete products will not be accepted. Credit for returns will be issued within 30 days of arrival at Ridetech. Ridetech reserves the right to deny credit for any items damaged by the customer.
